Effect of steam environment on severe core damage behaviour for VVER-1000 with the ASTEC V1 code

Severe accident studies for very low frequency events for VVER-1000 (V320) are carried out to estimate in-vessel damage progression under steam-rich and starved conditions. The analyses with code ASTEC, jointly developed by IRSN (France) and GRS, Germany), have shown the influence of steam environment on core heat-up followed by material relocation, hydrogen production, vessel failure and aerosol generation along with release to containment. Hydro-accumulator injection for studied transients also gives rise to a steam-rich environment enhancing the material oxidation depending on the injection time and period. The generated information along with PSA-Level 2 is helpful to decide Plant Damage State (PDS) and fruitfully develop accident management strategies for the plant.     

Chemically deposited zinc oxide thin film gas sensor

Zinc oxide (ZnO) thin films were prepared by a low cost chemical deposition technique using sodium zincate bath. Structural characterizations by X-ray diffraction technique (XRD) and scanning electron microscopy (SEM) indicate the formation of ZnO films, containing 0.05–0.50 m size crystallites, with preferred c-axis orientation. The electrical conductance of the ZnO films became stable and reproducible in the 300–450 K temperature range after repeated thermal cyclings in air. Palladium sensitised ZnO films were exposed to toxic and combustible gases e.g., hydrogen (H₂), liquid petroleum gas (LPG), methane (CH₄) and hydrogen sulphide (H₂S) at a minimum operating temperature of 150 °C; which was well below the normal operating temperature range of 200–400 °C, typically reported in literature for ceramic gas sensors. The response of the ZnO thin film sensors at 150 °C, was found to be significant, even for parts per million level concentrations of CH₄ (50 ppm) and H₂S (15 ppm).     

Tape Cast Multilayer Composite of Nano Zirconia with High Toughness

During the last decade, worldwide attention of researchers has focused on nano-ceramic composites with superior mechanical behavior and improved reliability for structural applications. Here we report the development of a multi-layer composite (MLC) of tape cast nano zirconia with high failure energy. The MLC samples were fabricated by thermocompression of green tapes prepared from 3 mole % yttria stabilized zirconia (3-YSZ) powder with a primary crystallite size of 27 nm. Depending on the number of layers, the MLC samples exhibited failure energy (238.97 KJm^-3) more than two times higher than that of the single tape (≈107 KJm^-3) with a reasonably high bi-axial flexural strength (≈630 MPa), high hardness (≈ 13 GPa at 49 N), and indentation fracture toughness nearly four times as high as that of the single tape. In addition, these MLC materials showed the presence of a R-curve behavior.     

Generalised disturbance adaptive optimal regulator

In the present work, choosing a varying output weighting matrix, an optimal regulator having state feedback terms with variable gain and feed-forward terms dependent on input as well as output disturbances has been proposed.     

Colorimetric Estimation of Allyl Isothiocyanate Content in Mustard and Rapeseed Oils

A colorimetric method based on the colour reaction between allyl thiourea and potassium ferricyanide solution in dilute acetic acid has been developed for the determination of allyl isothiocyanate content in mustard and rapeseed oils. The method measures the optical density of the colour complex at 600 nm and it works in the range 2.5 to 7.5 μg of allyl isothiocyanate per ml of the colour solution. Mustard and rape oil samples analysed contain 0.40 to 0.6% of allyl isothiocyanate, with standard deviation of 0.002 to 0.016. The method takes around 3 hours and permits a number of sample analysis at a time.     

Formation of a DO19 phase in zirconiumaluminium martensites

Journal of Materials Science -